manualshive.com logo in svg

Body flex IT 8020, Руководство пользователя, Страница: 9 / 16

Поделиться
Скачать
Body flex IT 8020 Скачать руководство пользователя страница 9

D

56

C

B

A

Page 8 

Hardware Required

D.) Plastic Clip Base Protectors

The 4 

Plastic Clips (#17/#58

)

 add stability and safety to the unit.

The assembly process is now complete, HOWEVER , please do not  

use the inversion table until you have completed reading the manual 

to learn about the safety features and operation procedures.

the

Slide the 

Safety Bar (#51)

 into either the top set of holes or 

the bottom set on the 

Rear Base (#103) 

and secure it with a 

Quick Clip (#52)

.

Height Adjustment Tube (#105)

 up or down.

Ensure that four 

Plastic Clips (#17/#58

)

 are installed on the

Front Leg Tube (#101)

 and 

Rear Base (#103)

 before using 

the unit. If for any reason they are not installed on the unit, 

follow these simple steps to install them.

First, lift the front end up and you will notice that there is a hole 

on the bottom. Insert the clip pin on the 

Plastic Clip (#17)

 into

the hole on the 

Front Leg Tube (#101)

 and snap it into place. 

Repeat this process to snap the 

Plastic Clip (#58) 

into the 

Rear Base (#103)

 if neccessary.           

#43 Lock Nut (M8) 

[1 piece]

Bolts

#56 Hex Bolt (M8x45 mm)

[ 1 piece]

#45 Washer (M8)

[1 piece]

#52. Quick Clip

        [1 Piece]

Washer

Nut

Others

A s s e m b l y   S t e p   4

A.) Foam Roller Assembly

Slide the two 

Foam Rollers (#120)

 onto the 

Height

Adjustment Tube (#105)

and another two on the 

Ankle

Brace Tube (#112).

Apply soapy water to the tubes if the 

 foam rollers do not slide on easily. 

B.) Adjustable Foot Tube Assembly

Slide the 

Adjustable Foot Tube (#108) 

with the “UP” sticker 

facing up in the 

Height Adjustment Tube (#105) 

and secure 

it with one 

Hex Bolt (#56)

, one 

Washer (#45)

 and one 

Lock 

Nut (#43).   

 

NOTE: Any settings should always hold your feet snugly 

during inversion for your safety. 

(ALWAYS WEAR ATHLETIC SHOES BEFORE INVERTING!) 

C.) Height Adjustment Tube Assembly

With the help of an assistant, attach the 

Height Adjustment 

Tube (#105)

 to the 

Backrest Frame (#07B) 

 by pulling the 

Height Selector Lock Pin (#19)

 out and simultaneously 

sliding the

 Height Adjustment Tube (#105) 

in

. 

Release the

Height Selector Lock Pin (#19) 

to any setting for now. 

The

Height Adjustment Tube (#105) 

is designed to 

accommodate the height of various users; set it accordingly 

by pulling the 

Height Selector Lock Pin (#19)

 as you slide 

Assembly Instructions

IT8020

Содержание IT 8020

















Отзывы:

Нет отзывов