manualshive.com logo in svg

Body flex IT 8020, Руководство пользователя, Страница: 11 / 16

Поделиться
Скачать
Body flex IT 8020 Скачать руководство пользователя страница 11

Safety Instructions

Page 10

IT

8020

Strap Adjustment

ALWAYS ENSURE 

BOTH ENDS

 OF THE SAFETY STRAP ARE 

SECURELY CLIPPED

 TO THE UNIT PRIOR TO USE.

The buckle of the Safety Strap should be positioned about halfway down the Safety Strap with the concave side facing up. 

The two ends of the buckle should show; the middle slot should be covered up by the  Safety Strap. 

Feed the free end of the Safety Strap through the buckle under one end, over the middle and under the other end. 

The buckle should be fastened to allow length adjustment on the Safety Strap loop. 

The shorter the strap, the less the angle of inversion; The longer the strap, the greater the inversion angle.

To Shorten the Strap: Feed the upper strap through the buckle and pull the loose lower strap. 

To Lengthen the Strap: Feed and pull the upper strap through the buckle. 

To prevent serious injury, death, and/or unexpected inversion incline, always rock the backpad back to gauge the maximum inversion 

permitted by the strap before using the unit, 

First time users should adjust the tether strap by shortening it for minimal inversion.

THE FIRST TIME THAT YOU USE THIS INVERSION TABLE, HAVE SOMEONE WITH YOU TO WATCH YOU. ALTHOUGH 

THE INVERSION TABLE IS EASY TO USE, HAVING SOMEONE NEARBY TO “SPOT” YOU WILL PROVIDE YOU WITH 

COMFORT AND ENSURE YOU HAVE THE CORRECT INITIAL SETTINGS.

Before starting, ensure that the Inversion Table is at the correct settings to match your height and weight. As each individuals’ 

body type is different, you will need to find the correct settings for you personally.

ENSURE THAT ALL PULL PINS ARE TIGHT AND ENTIRELY IN THE HOLES.

ALWAYS MAKE SURE THAT THE SAFETY STRAP IS ATTACHED.

AVOID INVERTING AFTER MEALS.

This end attached here

This end attached here

Feed strap

then pull

Feed strap

and pull

SHORTEN

STRAP

LENGTHEN

STRAP

Содержание IT 8020

















Отзывы:

Нет отзывов