Body flex IT 8020 Скачать руководство пользователя страница 10

Safety Instructions

A

Page 9

The Safety Lock is pre-installed on your inversion unit. It consists of the Safety Lock (#142), Spring (#53), Washer 

(#33), and Lock Nut (#30).  

 

To 

UN-LOCK

 Your Unit: 

1. PUSH the 

Lock Nut (#30)

 end inward 

as shown in drawing B.

2. PULL the 

Safety Lock (#142)

 outward at the same time.

3. TWIST the 

Safety Lock (#142)

 off of the 

Height Adjustment

Tube (#105)

. There is no need to remove the 

Safety Lock (#142)

4. Your unit is now unlocked. PLEASE REMEMBER TO 

LOCK THE UNIT WHEN NOT INVERTING AND/OR WHEN 

THE UNIT IS NOT IN USE FOR THE SAFETY OF YOU

AND THOSE AROUND YOU.

To 

LOCK

 Your Unit: 

1. PUSH the 

Lock Nut (#

3

0)

 end inward as shown in drawing B.

2. PULL the 

Safety Lock (#

142

outward at the same time.

3. TWIST the 

Safety Lock (#

142

)

 and place it over and on the 

Height Adjustment Tube (#

105

)

 as show in drawing A.

4. Your unit is now ‘locked’. ALWAYS KEEP THE SAFETY LOCK 

IN THE LOCKED POSITION WHEN 

NOT

 INVERTING AND/OR 

WHEN THE UNIT IS 

NOT

 IN USE FOR THE SAFETY OF YOU 

AND THOSE AROUND YOU.

B

‘Locked’ Position

Safety Lock

WARNING: 250 lb. WEIGHT CAPACITY

DO NOT USE THIS INVERSION TABLE WITHOUT A PHYSICIAN’S APPROVAL IF YOU

HAVE ANY OF THE FOLLOWING CONDITIONS

 (This list is for reference only and is 

not an exhaustive listing): Pregnancy, Hiatal Hernia, Ventral Hernia, Glaucoma, Retinal 

Detachment or Conjunctivitis; High Blood Pressure, Hypertension, recent Stroke or Transient 

Ischemic Attack; Heart or Circulatory Disorders for which you are being treated; Spinal Injury; 

Cerebral Sclerosis; Acutely Swollen Joints; Bone Weakness (Osteoporosis), recent unhealed 

fractures, medulary pins and/or surgically implanted orthopedic supports; the use of anticoagulants, 

including high doses of aspirin; Middle Ear Infections; Extreme Obesity.

IF YOUR PHYSICIAN PERMITS YOU TO USE INVERSION THERAPY, DO SO UNDER

THEIR DIRECTION AND HAVE OUR GUIDELINES APPROVED BY YOUR PHYSICIAN.

DO NOT LET CHILDREN USE THE INVERSION TABLE UNSUPERVISED.

THERE ARE CERTAIN PEOPLE WHO SHOULD NEVER INVERT. IF YOU THINK YOU

BELONG TO THIS MINORITY, PLEASE CHECK WITH YOUR PHYSICIAN BEFORE USING

THIS INVERSION TABLE.

IMPORTANT:

ALWAYS ENSURE SAFETY HOOKS  

ARE LOCKED IN PLACE BEFORE USE.

Always secure your ankles by Adjusting top rollers (using pull pin) as close to bottom rollers

as possible at a comfortable but snug position. 

**BE SURE PULL PIN LOCKS INTO PLACE IN ORDER TO SECURE ANKLES!**

142

105

30

30

105

142

General Safety

IT8020

Содержание IT 8020

















Отзывы: