Body Champ BRT3858, Руководство пользователя

Страница: 9 / 28

A s s e m b l y S t e p 3
Others
COUPLER BAR ASSEMBLY (Part I)
Referring to the diagram below, on the right side of the Center Post (#02)
–in the following order--slide on one Plastic Bushing (#63), one Special
Washer (#46) followed by the Right Coupler Bar (#06) , one D Shape
Washer (#45), one Round Cap (#64), one Washer (#40), and secure
using one Bolt (#30).
On the opposite side, assemble –in the following order— slide on one Plastic
Bushing (#63), one Special Washer (#46) followed by the Left Coupler
Bar (#05) , one D Shape Washer (#45), one Round Cap (#64), one
Washer (#40), and secure using one Bolt (#30).
COUPLER BAR ASSEMBLY (Part II)
Attach the Right Pedal Tube (#04A) onto the Crank (#19) as illustrated and
secure by inserting from the outer edge of the Right Pedal Tube (#04A) :
one Bolt (#22) and one Special Washer (#47). Secure from the inner side
(behind the Crank (#19) ) with one Nylon Nut (#36).
Repeat this process on the other side using the
***PLEASE DO NOT tighten the hardware until PART III below has been completed.
This will allow you to align the holes for proper and smooth assembly***
Left Pedal Tube (#03A).
COUPLER BAR ASSEMBLY (Part III)
Using the drawings as reference, attach the free end of the bottom of the
Right Coupler Bar (#06) to the front of the Right Pedal Tube (#04A) by
aligning the holes. After the holes are aligned, insert one Bolt (#23)
through the Right Pedal Tube (#04A) ,the Right Coupler Bar (#06) and
secure using one Washer (#39) followed by one Nylon Nut (#37).
Repeat this process on the other side using Left Coupler Bar(#05) and Left
Pedal Tube (#03
tighten the hardware on both sides.
A
). *** Now, you may return to PART II of this Assembly Step to
Hardware Required
NUTS
WASHERS
BOLTS
#22. Bolt (1/2"x97 mm) [2 Pieces]
#23. Bolt (M10x58 mm) [2 Pieces]
#30. Bolt (M8x20 mm)
[2 Pieces]
#39. Washer (M10)
[2 Pieces]
#40. Washer (M8)
[2 Pieces]
#45. D Shape Washer
(19 mm) [2 Pieces]
#36. Nylon Nut (1/2")
[2 Pieces]
#37. Nylon Nut (M10)
[2 Pieces]
#64. Round Cap
(38 mm)
[2 Pieces]
#46. Special Washer
(ID.19 mm)
[2 Pieces]
#47. Special Washer
(ID.16 mm)
[2 Pieces]
#63. Plastic Bushing
[2 Pieces]
Page 8 BRT 3858
LEFT
RIGHT
Assembly Instructions