Body Champ BRM2720X, Руководство пользователя

Страница: 18 / 24

BRM2720X / 2780 Page 16
Computer Operation
FUNCTION AND OPERATIONS (CONTINUE)
BATTERY INSTALLATION/REPLACEMENT:
Place the palms of your hands and grip lightly on both the contact pads and the monitor will display
your heartbeat rate in beats per minute (BPM) on the LCD display. NOTE: If there is no pulse signal
input within 16 seconds, the display will indicate a “P”. This is a power saving mechanism. The user
can press any key to restart the pulse (T.H.R.) function.
(PULSE) RECOVERY:
Pulse recovery is a measure of how quickly you return to your resting heart rate after a workout.
When you stop from exercising and desire to test your pulse recovery: Press the RECOVERY button
and place the palms of your hands on both of the contact pads for one minute. The monitor will show
your pulse recovery ratio on the LCD between 1.0 to 6.0 (1.0 being the best and 6.0 being the worst)
with increments of 0.1.
CAUTION:
Operating temperature: 0°C - +50°C.
Storage temperature: -10°C - +60°C.
1. Lift off the battery cover and place two SIZE-AAA or UM-4 batteries into the battery housing on
back of monitor with the +/- sides installed correctly.
2. Please ensure batteries are correctly positioned and battery springs are in proper contact with
batteries.
3. Replace battery cover and ensure it is tightly closed.
4. Battery life is approx. 1 year under normal usage.
5. If the display is illegible or only partial segments appear, remove batteries and wait 15 seconds
before reinstalling.
6. Removing the batteries will erase the computer memory.
NOTES (Regarding the Computer Monitor):
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.