Computer Operation
BRM 3600 Stride Cycle
Fitness Computer
RESET
MODE
SET
SPEED
Fitness Computer
RESET
MODE
SET
SPEED
SCAN
Fitness Computer
RESET
MODE
SET
CAL
Fitness Computer
RESET
MODE
SET
PULSE
SCAN
Fitness Computer
RESET
MODE
SET
TIME
Fitness Computer
RESET
MODE
SET
DIST
The TIME feature can be accessed by
pressing the mode button until you see
the word “TIME” displayed below. To set
the desired amount of time you wish to
exercise, press the SET button until you
reach the desired time. Press RESET to
clear the time.
TIME FUNCTION
SPEED FUNCTION
DISTANCE FUNCTION
CALORIE FUNCTION
PULSE FUNCTION
SCAN FUNCTION
The SPEED feature can be accessed by
pressing the mode button until you see the
word “SPEED” displayed below. Press
RESET to clear the speed.
The DISTANCE feature can be accessed
by pressing the mode button until you see
the word “DIST” displayed below. To set
the desired distance you wish to reach,
press the SET button until you reach the
desired distance. Press RESET to clear the
distance.
The CALORIE feature calculates the amount
of calories burned and can be accessed
by pressing the mode button until you see
the word “CAL” displayed below. To set the
desired amount of calories you wish to burn,
press the SET button until you reach the
desired quantity. Press RESET to clear the
calories.
The PULSE feature takes your pulse when you
grab the Pulse handle bars and can be accessed
by pressing the mode button until you see the
word “PULSE” displayed below. To set the
desired pulse you wish to reach, press the SET
button until you reach the desired pulse. The
computer will beep when your desired pulse is
reached. Press RESET to clear the pulse.
The SCAN feature can be accessed by
pressing the mode button until you see the
word “SCAN” blinking below in conjunction
with another feature. This feature will
automatically change the mode from TIME,
SPEED, DISTANCE, CALORIE, PULSE and
SCAN. Each mode is displayed for about 6
seconds before it changes to the next one.
The following instructions will show you how to use the Computer. The computer on the BRM 3600 will start automatically when
you begin to exercise. If it does not turn on, press any of the buttons. If it still does not turn on, your battery most likely needs to
be replaced. Access the battery compartment located on the bottom side of the computer and replace the two double AA batteries.
To completely reset the Computer, press the RESET button for 4 seconds.
Please note, the SET feature allows you to set the desired time, distance, calorie burn amount and pulse rate you wish to achieve
prior to starting your workout. The computer will display the statistics in countdown mode when you use the SET feature for time,
distance and calorie burn. The computer will beep when the count reaches zero. If the SET feature is not used, the computer will
count upward instead.
Page 1
2
