Page 7
A s s e m b l y S t e p 3
Hardware & Tool Required
#33. Bolt (M8x15 mm)
[4 Pieces]
Washer
#32. Spring Washer (M8)
[4 Pieces]
Tool
[1 Piece]
[1 Piece]
Bolt
Others
#23. Spring Loaded Knob
[1 Piece]
Spring Knob Operation
Turn
Spring Loaded Knob (#23)
counter
-clockwise three times.
Pull
Spring Loaded Knob (#23)
outward
and attach
Center Post (#06)
to the
Main
.
Push
Spring Loaded Knob (#23)
back
inward until it clicks and then tighten it by
turning clockwise.
Frame (#01)
simultaneously
55
40
1
2
3
4
55
40
1
2
3
4
STEP3:
Assembly Instructions
BF 718
Attach the
Handle Bar (#07)
to the
Center Post (#06)
and
secure them together by inserting four
Bolts (#33)
through
four
Spring Washers (#32)
then through the holes on the
Handle Bar (#07)
and the
Center Post (#06).
Secure the
Spring Loaded Knob (#23)
to the front of the
Main Frame (#01)
by turning the
Spring Loaded Knob
(#23)
clockwise.
Once the
Handle Bar (#07)
is properly secured to the
Center Post (#06)
, insert the
Center Post (#06)
into the
Main Frame (#01)
with the
Handle Bar (#07)
facing outwards
as illustrated. Secure the
Center Post (#06)
to the
Main
Frame (#01)
using the
Spring Loaded Knob (#23).
Handle Bar Assembly
Remove the
Spring Loaded Knob (#23)
that are pre-installed
on the front of the
Main Frame (#01)
as illustrated and set
them aside.
