CUSTOMER SERVICE 1-888-707-1880 19 MAURICE PINCOFFS CANADA INC
©
2008
TREADBELT ADJUSTMENT
The treadbelt has been factory pre-adjusted, however
if during the operation:
Treadbelt slips during use if the treadbelt is too loose
:
a) Tighten both rear roller adjusting bolts 1/4 turn
clockwise using allen wrench.
Treadbelt shifts too far to the right
a) Set the treadmill speed to 3.5 M.P.H.
b) Tighten the right adjusting bolt a 1/4 turn clockwise
using allen wrench.
c) Wait 15 seconds: if no change; turn the left adjusting
bolt a 1/4 turn counter-clockwise using allen
wrench.
d) Repeat steps b and c until belt is centered
Treadbelt shifts too far to the left
a) Set the treadmill speed to 3.5 M.P.H.
b) Tighten the left adjusting bolt a 1/4 turn clockwise
using allen wrench.
c) Wait 15 seconds: if no change; turn the right adjusting
bolt a 1/4 turn counter-clockwise using allen
wrench.
d) Repeat steps b and c until belt is centered
IMPORTANT
DO NOT OVERTIGHTEN TREADBELT
If treadbelt is over-tightened, edges of treadbelt will begin to curl
CAUTION!!
DO NOT ALLOW ANYONE TO
WALK ON TREADBELT WHILE YOU ARE ADJUSTING.
1 / 4 T U R N
1 / 4 T U R N
1 / 4 T U R N
I f T R E A D M I L L
s l i p s d u r i n g u s e .
t o o f a r t o R I G H T .
I f T R E A D M I L L i s
I f T R E A D M I L L i s
t o o f a r t o L F F T .
If Treadbelt slips during use
.
If Treadbelt shifts too far to the right
If Treadbelt shifts too far to the left
