
CUSTOMER SERVICE 1-888-707-1880
MAURICE PINCOFFS CANADA ©2007
10
STEP 5 ATTACHING THE HANDLEBAR AND MONITOR
Attach the handlebar w/pulse (18) to bracket on the handlebar post (14). Secure using
the clamp cover (19), one spacer (15) and one T knob (20).
Note:
It will be necessary to move the hand pulse wire (34) around the upright post and
away from the monitor bracket to avoid pinching the wires.
Connect the hand pulse wire (34) into the back of the monitor (17).
Connect the extension computer wire (16) to the back of the monitor (17).
Slide the monitor (17) on the bracket of the handlebar post (14). Secure using 2 screws
(32) found at the back of the monitor.
NOTE:
Before attaching the monitor to the handlebar post, please ensure the wire is
safely tucked inside the opening of the handlebar post. This will ensure that the
computer slides on easily and avoids pinching the wire.
You have completed the assembly of your new upright cycle.
The monitor can only be powered by using the AC adaptor.