Customer Service 1-888-707-1880
Or email
12
Dyaco Canada Inc.
©2013
MONITOR INSTRUCTION
FUNCTION BUTTON
Mode:
Press to select functions between: time, speed, distance, calories and
scan.
Press and hold for 3 seconds to rest all values to zero.
FUNCTION:
Time:
Displays your elapsed workout time up to 99:59
Speed:
Displays the current speed up to 99.9 km.
Distance:
Displays the cumulative distance traveled during your workout up to
99.9KM
Calorie
Displays the cumulative calories burned at any given time during your
workout up to 999 kcal.
Note: This is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes.
Scan:
Displays each function in sequence every 4 seconds. The display loop is
time, speed, distance and calories.
Odometer: Displays the total distance accumulated up to 99.59KM
NOTE
1.
Monitor requires two “AAA” batteries
2.
The monitor will turn on automatically by pressing any key or when you start pedaling.
3.
The monitor will turn off automatically if no signal is detected for four minutes.
4.
If monitor is illegible or partial segments appear, remove batteries and wait 15
seconds to re-install.
