User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd
www.bodorcnc.com
29
picture A
Focus test is as shown in picture A:
First paste double-sided adhesive tape on outlet, press pulse button and check if the facula
is on the center of outlet. If not, please adjust 3 screws of laser head.
Attention:
Laser is invisible light but can do harm to human body. Please keep away from the laser
path when debugging. The operator must master the basic knowledge of laser machine.
put a double-sided adhesive tape on the
outlet of the laser head, take left hand side
as left, right hand, right;laser tube side,
front and people where we stand,
backside.
Laser beam spot should be in the center of
the outlet. Please refer to picture A. If not,
please adjust No.31,32,33 screws.
Left -- please adjust No.32 screw;
Right -- please adjust No.31 and 33 screw;
Front -- please adjust No.32 and 33 screw;
Back -- please adjust No.31 and 32 screw.
