User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd
www.bodorcnc.com
18
forbidden. Temperature of working environment should be 10
℃
to 38
℃
, humidity should
be 10- 90%. AC 220V±10%, 50HZ, resistance to ground less than 5Ω.
3.1.2 Preparation of operator
The operator must know well the main point of installation. Otherwise, the damage of
machine parts will not in our scope of protection.
3.1.3 Preparation of tools
There is tool box with this machine. Besides, multi-meter and screwdriver and other
detection tools are needed.
3.1.4 Other preparation
Purified water for water chiller, power strip, pipe for discharge smoke, sample material,
etc.
PS: It’s better for users/customers to learn how to install the machine.
3.2 Installation Steps
3.2.1 Package of laser tube
3.2.1.1 package of laser tube
In case of damage during transportation or outside force, the tube is packed with sponge.
And two ends of tube are sealed with zip lock bag to prevent the mirror from pollution or
scratch. Finally, the tube is built up with sponge supports to prevent tube have direct
contact with surrounding.
3.2.1.2 Unpack Laser Tube
Take out the laser tube. Both hands hold the middle of the tube; take off the sponge
supports; take off the packing sponge; take off the zip lock bag. Then inspect whether the
tube is intact.
If tube have any defect, please take photo and send to Bodor for confirmation.
Attention: It needs as least two person when unpack. Handle the tube with care.
