User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd
www.bodorcnc.com
19
3.2.2 Installation of Laser Tube
Before tube installation, move laser tube to the backside of machine for easy installation.
Laser tube is installed in the backside of gantry. Open protective cover for laser tube, we
will notice that there are 2 laser tube brackets, 2 water tubes, 1 black lower-voltage wire
and 1 red high-voltage wire.
lower-Voltage End of laser tube
Higher-Voltage End
3.2.2.1
Firstly, use M3 Allen Wrench to take off M4 screw on laser tube bracket and take down
the upper part. Let the out-gate of laser tube(lower-voltage end) face the first reflector and
put it softly on the bracket.
Then fix the upper parts of bracket with screws. Connect high-voltage wire and
water-in/out tube. As picture VIII.
PS
：
●Beam Out-gate of laser tube should keep estimated 2.5cm distance from the first
reflector.
●Do not over fasten laser tube in case there is any damage.
Bracket for
laser tube
First
Reflector
Water-in
Tube
