Failure Status will be reset when the unit passes:
• The next automatic test, or
• Briefly pressing the 2 wire ITS, or
• A power failure exceeding 10 seconds.
NOTE:
The converter connector (red and white wires) must be connected for the AC driver to
operate normally.
5
EMERGENCY DRIVER AND AC DRIVER MUST BE FED FROM THE SAME BRANCH CIRCUIT
TYPICAL SCHEMATICS ONLY. MAY BE USED WITH OTHER DRIVERS. CONSULT THE FACTORY FOR OTHER WIRING DIAGRAMS.
WIRING DIAGRAMS
NOTE 1:
For short-term testing of the emergency function, the battery must be charged for at least one hour.
The emergency driver must be charged for at least 24 hours before conducting a long-term test.
NOTE 2:
The YELLOW, YEL/BLK, VIOLET, BROWN, RED, and WHITE (CONVERTER CONNECTOR) wires are all Class 2.
Tc
222.25 mm
15. mm
TCASE TEST POINT LOCATION
AC LED
DRIVER
WALL
SWITCH
UNSWITCHED HOT
YELLOW
COMMON
WHITE
YEL/BLK
OUTPUT (-)
LED LOAD (+)
LED LOAD (-)
WHITE
WHT/BLK
WHT/RED
BLUE
OUTPUT (+)
BLACK
BLACK
WHITE
GREEN
GROUND
L
E
D
D
R
I
V
E
R
E
M
E
R
G
E
N
C
Y
VIOLET
VIOLET
BROWN
BROWN
CONVERTER
CONNECTOR
RED
2W-ITS
AC LED
DRIVER
WALL
SWITCH
UNSWITCHED HOT
YELLOW
COMMON
WHITE
BLUE
WHITE
BLACK
YEL/BLK
OUTPUT (-)
LED LOAD (+)
LED LOAD (-)
WHITE
WHT/BLK
THERMAL
PROTECTOR
WHT/RED
BLUE
OUTPUT (+)
BLACK
BLACK
WHITE
OR
RED
GREEN
GROUND
L
E
D
D
R
I
V
E
R
E
M
E
R
G
E
N
C
Y
VIOLET
VIOLET
BROWN
BROWN
CONVERTER
CONNECTOR
RED
2W-ITS
WITH THERMAL PROTECTOR
