Bodet Style 5 Seconde, Быстрый старт

Страница: 7 / 16

6) LOCATION OF THE “SELECT” AND “+” KEYS
- These two keys are located on the back of the clock, on the right on Style 5 , Style 5 s and
Style 5 date clocks, on the left on Style 7 , Style 7 ellipse and Style 7 date clocks.
- The “ Select ” key is above the “ + ” key.
7) CONFIGURATION
a -
To access this menu, first press the “ SELECT ” key, then keeping the “ SELECT ” key
pressed down, press the “ + ” key for 3 seconds.
Caution : the seconds automatically reset to zero upon accessing the “configuration”
menu.
- The clock displays the previously selected operating mode :
Operating Mode Display
Style
5, 5 s, 7 and 7 ellipse
Style
5 date and 7 date
Independent
Minute slave movement
Half-minute slave movement
Calibration
Select the required operating mode using the “ + ” key.
Remark : make sure that the mode selected matches both the desired mode of operation
(e.g. minute slave movement), and the clock’s descriptive label (e.g. “Ind.-Impuls.”).
When the chosen operating mode (e.g. “Ind”) appears on the display, press the “ Select ” key
to enter your selection. Avoid entering the Calibration mode, reserved for the manufacturer.
Note : It is possible to exit this menu at any time. All you have to do is to press the “ Select ”
key, and then with the “ Select ” key pressed down, press the “ + ” key. Release the two keys
afterwards.
b -
Style 5 , Style 5 s , Style 7 and Style 7 ellipse clocks
Using the “ + ” key, select the type of display required from one of the following three
options :
7