8) TIME-SETTING
a -
When on the normal display, or on the “Bat” display
following a prolonged mains power failure, press the
“
Select
” key.
The clock displays the time, and the minutes blink.
- Pressing the “
+
” key makes it possible to increment the
minutes, with a rapid scrolling facility when the key is
pressed down for a long time.
Each time the “
+
” key is pressed, the seconds are reset
to zero.
Accurate time setting of a clock operating
independently :
- Use a “reference” time (e.g. radio or TV broadcast or
the speaking clock)
- Using the “
+
” key, set the
Style
clock to the current
minute.
For example, if the reference time is
“20 hours 28 minutes and 20 seconds”, display “28"
using the ”
+
" key.
- When the reference time reaches “20 hours 29
minutes 00 seconds”, simultaneously press the “
+
” key.
This makes it possible both to increment the “minutes”
digit (and therefore to go from “28" to ”29"), and to reset
the seconds to zero.
When the value required for the minutes has been set,
press the “
Select
” key.
b -
The minutes stop blinking and the hours blink.
- Set the hours using the “
+
” key, then enter by pressing
the “
Select
” key.
Note : It is possible to exit this menu at any time. All you
have to do is to press the “
Select
” key, and then with the
11
Содержание Style 5 Seconde
Страница 16: ...16...