5
I - Initial Verification
Thank you for choosing a BODET Sigma C master clock. This product has been carefully
designed for your satisfaction based on ISO9001 quality requirements.
We advise you to read this manual thoroughly before attempting to set up the product.
Please keep this booklet, so that you can refer to it when necessary.
Bodet accepts no responsibility for any issues resulting from any use not conforming
with the guidance in this document.
Any such modification to the product will invalidate the product warrantyee.
1.1 General information
The Sigma C is a master clock which can be used to control slave clocks and heating circuits,
lighting, bell ringing and access to the doors of the building.
The master clock has functions which can be programmed from the technician menu.
On first installation, it is essential to program the technician menu (see page 26) before the
customer menu.
It is also essential when installing the master clock to program the technician functions in the
order in which they appear in the menu.
This product must be installed in a residential, commercial or light industry environment.
1.2 Unpacking the master clock
Checking the equipment :
■
master clock Sigma C,
■ one USB flash drive,
■
one CD containing the PC software,
■
this manual.
With (option card) :
■ relay card (1 SPDT and 2 SPNO relays) (ref: 907 535).
■ 3 external inputs card (ref: 907 542).
1.3 Cleaning
Use an antistatic product identical to that supplied. Never use alcohol, acetone or other solvents
which may damage the product casing.
