![background image](http://html.mh-extra.com/html/bodet/kelio-visio/kelio-visio_instructions-manual_2782429017.webp)
TABLE OF CONTENTS
1.
INITIAL CHECK ........................................................................................................................................ 2
2.
WARNING ................................................................................................................................................. 2
3.
TERMINAL OVERVIEW ........................................................................................................................... 3
3.1
C
ONNECTORS
.................................................................................................................................... 3
3.2
P
ILOT LAMPS
...................................................................................................................................... 4
3.3
O
PERATION OF PILOT LAMPS
............................................................................................................... 5
4.
INSTALLATION ........................................................................................................................................ 6
4.1
M
ECHANICAL INSTALLATION
................................................................................................................. 6
4.2
E
LECTRICAL INSTALLATION
.................................................................................................................. 6
4.3
C
ONNECTING COMMUNICATION LINKS
................................................................................................... 6
4.4
R
EADER
'
S CONNECTION
...................................................................................................................... 7
5.
ENROLMENT ........................................................................................................................................... 8
5.1
A
UTHENTICATION MODE
...................................................................................................................... 8
5.2
I
DENTIFICATION MODE
....................................................................................................................... 10
5.3
E
NROLMENT RECOMMENDATIONS
...................................................................................................... 11
6.
INFORMATION AND PRECAUTIONS TO TAKE IN RELATION TO BIOMETRIC IDENTIFICATION
PROCESSES .......................................................................................................................................... 12
6.1
B
IOMETRIC READING QUALITY
............................................................................................................ 12
6.2
D
ATA SECURITY
................................................................................................................................ 12
7.
ADJUSTING AND TESTING THE TERMINAL ...................................................................................... 13
8.
MESSAGES ON THE TERMINAL ......................................................................................................... 14
9.
MAINTENANCE OF THE BIOMETRIC MODULE ................................................................................. 15
9.1
R
EPLACING THE OPTICAL BIOMETRIC SENSOR PART
............................................................................ 15
9.2
R
EPLACING THE ELECTRONIC BIOMETRIC BOARD PART
........................................................................ 15
10.
PERFORMING ACTIONS DIRECTLY ON THE TERMINAL ................................................................. 16
11.
MODIFYING THE IP INTERFACE SETTING UP ................................................................................... 17
11.1
O
N THE TERMINAL
............................................................................................................................. 17
11.2
F
ROM THE CLOCK
'
S WEB PAGE
.......................................................................................................... 17
11.3
F
ROM THE
I
NSTALLATION MODULE
..................................................................................................... 17
11.4
C
ONNECTION TEST
........................................................................................................................... 17
12.
SAFETY INSTRUCTIONS AND EQUIPMENT PROTECTION .............................................................. 18
13.
TECHNICAL CHARACTERISTICS ........................................................................................................ 19
13.1
S
PACE REQUIREMENTS
..................................................................................................................... 19
13.2
T
YPES OF TERMINALS
....................................................................................................................... 19
1. INITIAL CHECK
Each terminal is supplied in its original package with two bags, each of them containing 2 screws,
2 dowel pins and 3 clamping collars pre-fastened to the back of the concentrator (these clamping
collars are used to fasten the cables under dangerous voltage).
2. WARNING
Any use that does not comply with these instructions can cause irreversible damage to the
electronic board of the device and voids the warranty.
Before installing and using the terminal, please read and make sure you understand the
safety instructions set out in paragraph "
Safety instructions and equipment protection
" of this
manual.
The terminal is a CLASS 1 device. As a result, the presence of a
protective earth connection is mandatory (connector [B2])