Bodet KELIO VISIO, Инструкция по эксплуатации

Страница: 31 / 35

10. PERFORMING ACTIONS DIRECTLY ON THE TERMINAL
Enter the menu with a technician code and click on E to validate.
If a connection has been previously established, you can enter in the menu with a code.
Click on
E to validate this code. This code is configured in the Installation Module of the Kelio
software, H
ARDWARE
> T
ERMINALS
> S
ITES
> M
AINTENANCE
Level
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup Ethernet IP MASK GW PA BACK
192.168.1.222 BACK
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup Ethernet IP MASK GW PA BACK
255.255.255.000 BACK
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup Ethernet IP MASK GW PA BACK
000.000.000.000 BACK
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup Ethernet IP MASK GW PA BACK
Ping the GW every 10mn Yes* No
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup serial IP SPEED BACK
192.168.192.192 38400 BACK
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup Modem IP RING LANG BACK
192.168.192.192 Number of rings Modem country BACK
Setup COM TEST QUIT
Connection ETH SERI MODEM 485 BACK
Setup RS485 IP BACK
192.168.222.001 BACK
Setup COM TEST QUIT
Hardware control TIME DIAG RST PING BACK
Set Date Time DATE TIME BACK
YYYY/MM/DD BACK
Setup COM TEST QUIT
Hardware control TIME DIAG RST PING BACK
Set Date Time DATE TIME BACK
HH:MM:SS BACK
Setup COM TEST QUIT
Diagnostic TIME DIAG RST PING BACK
SYNC ALIM BACK
Setup COM TEST QUIT
Hardware control TIME DIAG RST PING BACK
Reset HARD DB/SID MODEM BACK
YES NO BACK
Setup COM TEST QUIT
Hardware control TIME DIAG RST PING BACK
Ping host Host IP + E BACK
Press
E to confirm.