1)
Go to mode_prg and press [SEL] : the number of the month flashes.
Press [+] to select the month.
2)
Press [SEL] : “Order” flashes. Order denotes the sequence
number for the week of the month
11
(from 1 to 5 according to the
months) (order always denotes the last week).
The value “F” gives the choice of a fixed date.
3) Having determined the Order, press [SEL] : the “day of the week”
flashes.
–
Choice of a day of the week
(Order from 1 to 7) : press [+] and
select one of the values between 1 (Monday) and 7 (Sunday).
–
Choice of a fixed date
(Order = F) : press [+] and select a value
between 1 and the last day of the chosen month
12
.
4)
Press [SEL] : the number of the month flashes.
Give the start of the winter period. Press [+] to select the month.
Then continue as described in points 2 and 3 to set the start of the
summer period.
5) Menu available for radiosynchronised models only.
After having set the beginning of winter time, press [Sel]. The time
difference compared with UTC flashes on and off. Set it by pressing
[+]. Choose a value between -12h30 and +12h30 by step of 0h30.
Nota : for independant models (without external
synchronisation), the time difference menu is inactive. Time is set
only through time setting menu and time zone selection (summer/winter changeovers
choices).
Summer/Winter changeovers are done the selected days at 2h00 local time.
36
11
Example of Order calculation : the second Monday of the month and the second Thursday of the
month will each have an Order of “2”. While the last Tuesday in June has an Order of “5” since
there are no more than 5 weeks in a month.
12
The last day is either 28, 30 or 31 depending on the month (28 is imposed for the month of
February whatever the year).
