BODECKER BREWED BREWER, Руководство пользователя

Страница: 56 / 72

2007 Bodecker Brewed. All Rights Reserved. 56
OPERATING SPECIFICATION:
• If all DIP Switches are ON, there will be free vend and Coin Acceptor will not accept
any coin. Displays will show 000.
• Normal case, Vend price (Price set by the DIP switches) will be displayed and every
time a coin is accepted, the remaining money to vend will be displayed.
• Once coin accepted is more than or equal to the vend price, vending ready relay will
be activated. Displays will blink 000 and also beeps once.
• When cup switch is activated and brew button is pressed, vending will start and
during that time displays will steadily show 000 without any beep by the buzzer.
• When vending is over, vend price will be displayed and new cycle of vending can
start over again.
• WHEN DIP SWITCH IS CHANGED WHILE THE MACHINE IS POWERED ON, THE
MACHINE NEEDS TO BE RESTARTED TO TAKE THE NEW CHANGES INTO
EFFECT OR ATLEAST ONE VEND WILL BE DONE WITH THE LAST SETTINGS.
INSTALLATION:
• There are two sets of wires for installation from the Coin attachment . One is 4 wire
shielded wire and another is two isolated wires.
POWER WIRES:
• This is a pair of two wires, Red and Black. They are connected to the Transformer in
parallel to the wires from the Vending Machine board. These wires can be
interchanged. The following diagram shows the installation of those wires.