BOCK combiflex.fc, Руководство по сборке и эксплуатации

Страница: 31 / 36

31
– The middle telescopic side rail bar has to be put on the
lying surface. Please do not screw it yet. Both side rails
have to be placed on the connector and brought into the
correct position (picture 5+6).
– Then the side panelling of the frame between the tele-
scopic bars has to be mounted. Secure the middle bar
with screws (picture 7) and place the side panelling
from above into its correct position. If needed the positi-
on of the middle bar can be adjusted.(picture 8)
Fig. 7, right Fig. 8
– Now the middle telescopic bar can be screwed (picture
9+10).
Fig. 9, right Fig. 10
– After the assembly respectively the initial operation of
the bed, please process the lying surface adjustment to
check the optimal positioning of the cable. The adjusta-
ble range has to be without obstacles. The net cable
has to be outside the bed and the hand set has to be
accessible.
Combiflex fc is now ready for use!