BOCK combiflex.fc, Руководство по сборке и эксплуатации, Страница: 8 / 36

8
2.3 Avoid hazards
Please make sure to consider the following guidelines with
respect to the electrical component parts of your nursing beds
as this crucial to avoiding hazards related to the cleaning and dis-
infection. The non-observance of these guidelines may result in
considerable damages of the electrical lines and the drive.
1. Disconnect the mains supply and position it in such a
way that contact with excessive amounts of water or
detergents can be excluded.
2. Check of all plug-connections for correct position accor-
ding to the instructions.
3. Check of the wires and electrical component parts for
damages. Should you detect any damages, do not per-
form any cleaning operations, but first have the defects
repaired by the manufacturer or authorized personnel.
4. Check the mains supply for residual moisture before
starting the operation and dry or blow out the device, as
the case may be.
5. On suspicion of the intrusion of moisture into the elec-
trical components, disconnect the mains supply imme-
diately resp. do not reestablish the connection. Put the
bed out of operation immediately, attach an appropriate
visible labeling and get in contact with the manufacturer.
* Warning note from Bock
It is absolutely not recom-
mended to use abrasive
cleansers resp. detergents
containing grinding parti-
cles, cleaning pads or stain-
less steel cleaners for the
cleaning. Do neither use
organic solvents such as
alkyl/aromatic halids and
ketones nor detergents con-
taining acid or alkaline.
Never clean the bed using a
water hose or high-pressure
cleaner, as this might lead
to the intrusion of fluid into
the electrical components
which causes malfunctions
and hazards.