Boca Systems WinStorm M56HI, Руководство пользователя

Страница: 75 / 88

75
In some cases, writing to the S-Parameter will appear to be
accepted but the value will not actually be written.
Factory Defaults
The factory default values are stored in Product Configuration File
and are loaded into the active configuration at power up or by the Z
command. In addition, the default profile is subsequently loaded,
and may change some of the factory default values.
The default values in Product Configuration File may be loaded at
any time by entering the &F command.
S-Parameter Definitions
S0 - Number of Rings to Automatic Answer
S0 sets the number of the rings required before the modem
automatically answers a call. Setting this register to zero disables
auto-answer mode.
Range: 0-255 rings
Default: 0
S1 - Ring Counter
S1 is incremented each time the modem detects a ring signal on
the telephone line. S1 is cleared if no rings occur over an eight
second interval.
Range: 0-255 rings
Default: 0
S2 - Escape Character
S2 holds the decimal value of the ASCII character used as the
escape character. The default value corresponds to an ASCII ‘+’. A
value over 127 disables the escape process, i.e., no escape
character will be recognized.
Range: 0-255, ASCII decimal
Default: 43 (+)
AT Command Reference
manual2.p65 5/4/98, 12:38 PM 75