48
Boca WinStorm 56K
Reporting Current or Selected Values
Command:
+ILRR?
Response:
+ILRR: <current value>
Example:
+ILRR: 0
For the default setting
Reporting Supported Range of Parameter Values
Command:
+ILRR=?
Response:
+ILRR: (<value> range)
Example:
+ILRR: (0,1)
Reported Rate
The <rate> reported represents the current (negotiated or
renegotiated) DTE-modem rate. If enabled, the intermediate result
code is transmitted after any modulation, error control or data
compression reports are transmitted, and before any final result
code (e.g., CONNECT) is transmitted. The <rate> is applied after
the final result code is transmitted.
The DTE-modem port rate will change only if neither buffered mode
nor error controlled means are enabled (+ES=x,0) and if the
negotiated carrier rate (+MRR) does not match the current DTE-
modem port rate (autodetected from the previous command line).
Syntax
+ILRR: <rate>[,<rx_rate>]
Defined Values
<rate>
Decimal value representing the current
(negotiated or renegotiated) DTE-modem
rate:
0, 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200
<rx_rate>
Optional decimal value reporting the RXD
rate, if it is different from the TXD rate:
0, 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200
Example
+ILRR: 19200
manual2.p65
5/4/98, 12:37 PM
48
Содержание WinStorm M56HI
