Boca Systems Mag 42, Руководство пользователя

Страница: 28 / 31

The FGL 42 printers allow the user to adjust various printer options through the control panel.
1. Selects proper menu topic (baud rate, cut count, etc.)
2. Enters new value / Also saves new values.
3. Scrolls through choices in individual menu topics.
To access and use the OPERATOR MENU, follow these steps:
1. Ticket stock should be loaded into the printer.
The LCD window displays MAG-YYB#
2. Press both MENU and TEST switches simultaneously for
about three seconds. The LCD window displays
OPERATOR MENU! .
3. To scroll through the menu topics, press MENU stopping on the topic you wish to
change.
4. Press CHOICES to scroll through choices in the selected topic. NOTE: The
printer displays a blinking cursor for the values presently stored in the printer.
5. Once you have found the new value you want, press TEST. The LCD window
displays EXIT AND SAVE?. If you wish to save the new value, press TEST
again.
6. If you do not wish to save the new value, press MENU. The LCD window
displays JUST EXIT?. Press TEST to exit the OPERATOR MENU without
saving new values or press MENU to enter back into the OPERATOR MENU.
22
Appendix A - Operator Menu Options
1
2
3
MAG - Firmware ID
YY - Software Level
B - Major Revision Level
# - Minor Revision Level