Boca Systems Mag 42, Руководство пользователя

Страница: 22 / 31

Burst Count
The burst length is preset at the factory and should not require adjustment by the
customer. In the event that the ticket is not bursting at the proper location, the burst
length # should be adjusted to a value slightly greater than or less that the actual ticket
length. The ticket length is defined as the number of dot columns in the ticket. (For
example, a 3.375” long ticket at 305 dpi is approximately 1029 dots long.)
In addition to the burst length command, the burst count can also be adjusted from the
front panel by entering the factory menu. The procedure for doing this is given below.
1) Press and hold the two control panel keys, (MENU & CHOICES) to enter the
factory menu.
2) Scroll to the “INC BURST COUNT” or “DEC BURST COUNT” topic, depending on
the direction of adjustment, by repeatedly pressing the MENU key.
3) Press the CHOICES key to select the topic’s numeric value.
4) Repeatedly press the CHOICES key to increment or decrement the value as
necessary. Please note it is usually best to move in increments no larger than 10
counts at a time to prevent over compensation of the burst position.
5) Press the TEST key once to enter your choice and a second time to save the new
value permanently and re-initialize the printer.
16