Boca Systems Mag 42 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 31

Boca Systems Mag 42 Скачать руководство пользователя страница 23

Magnetic Format

The magnetics section of the printer is shipped from the factory in ISO (1 thru 3 track)
configuration.

ISO Format

The data for each track must be terminated with an EOT. All data must be sent in
accordance with the ISO specification.

Typical ISO data stream

<T1> block1 EOT
<T2> block1 EOT
<T3> block1 EOT
<WM>

NOTES:
1. Do not insert spaces in data stream. Spaces are for readability only.
2. ISO data contains only one block of data and no block separator characters.
3. A start, stop and LRC byte are automatically inserted into each track of data. These

three characters are counted among the maximum characters allowed per track.

4. Tracks 1 supports alphanumeric data. Tracks 2 & 3 are numeric only.
5. Maximum number of characters per track: Track 1 = 79; track 2 = 40; track 3 = 107

Automatic Re-print

Automatic Re-print is a user selected feature that provides for automatically
reproducing a ticket, including the magnetics data, that has failed the verification
process. The printer will make up to three attempts to produce a good ticket from the
original information before it returns an error message and halts any further ticket
processing. This feature was designed specifically for those customers using parallel
interfaces who can not receive status messages from the printer and would otherwise
not know when a void ticket has been printed.

17

«
...
21
22
23
24
25
...
»

Содержание Mag 42
































Отзывы:

Нет отзывов