bObsweep PetHair Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 55

bObsweep PetHair Скачать руководство пользователя страница 43

Test the touch and bumper sensors

To move on to this test, press the first left button on Bob twice (UV on Bob PetHair,

Mode on Bob Standard). The screen will go blank. Now you may test Bob’s touch/

bumper sensors.

Press on the right and left side of Bob’s bumper. On bObsweep PetHair, the words

Dirt and Mins. Cleaning light up as a result. On bObsweep Standard, the words

“Battery” and “Error” light up. If you press the center of the bumper, both words ap-

pear at the same time. If any or both signs fail to turn on, it is likely that Bob needs

a new bumper.

Test Bob’s display

Press the first left button on bObsweep one more time. Each icon on the screen will

light up in a repeating rotation.

Test Bob’s brush motor and vacuum suction

Press the far left button on bObsweep one more time until all icons on the screen

light up. Now press the ‘Program’ button (second button from the left).

In this mode the brushes start rotating and you will feel air flowing from the back of

the dustbin. Ignore the signs and numbers on the display in this test mode.

«
...
41
42
43
44
45
...
»

Содержание PetHair
























































Отзывы:

Нет отзывов