bObsweep PetHair, Руководство пользователя, Страница: 30 / 55

Brushes
(Re)installing the Main Brush
Use a Philips head screwdriver to remove the brush. Undoing the screw releases
the left side of the main brush, allowing you to take it off. To place it back, screw the
brush back on Bob.
Cleaning the Main Brush
If you see hair, yarn, debris, or dirt on bObsweep’s main brush, use a pair of scissors
and the cleaning tool to clean it. Use the cleaning tool to clean the brush from end to
end and to remove hair or dust collected around the ends of the brush. Do this on a
regular basis. If cleaning tool is not enough, use scissors to cut off any hair wrapped
around the brush.
(Re) installing the Side Brush
When bObsweep is first delivered to you, the side brush is not installed. Use a dark
grey screw from the small plastic bag of screws included inside bObsweep’s box to
assemble the side brush in place.