bObsweep PetHair Plus WPP56001, Руководство пользователя, Страница: 88 / 93

88
11. Why does Bob start up when I did not tell him to clean?
Bob will start up on his own when he is 1) scheduled to clean, or 2) when he is
on auto-resume mode.
First, make sure the “Current time and day” is set correctly on Bob’s
remote. Remember, Bob works on a 24-hour clock. If the current time and
date is incorrect, then Bob’s cleaning schedule will be out of sync. Consult
the Scheduling section of this manual ( page 32 ) for detailed instructions on
how to set Bob’s cleaning schedule.
When Bob is on auto-resume mode, he displays “bbgo” on his remote, below
“Scheduled Cleanings.” On auto-resume, Bob automatically begins cleaning
after he has fully charged. To disable auto-resume, press the SET CLEANING
SCHEDULE button on Bob’s remote. Then press STOP. “bbgo” will reset to the
last time saved. Press SET CLEANING SCHEDULE again to save your settings.
12. When should I use the different cleaning modes?
Deep Clean is Bob’s default mode and gives him enough time to thoroughly
cover a large area. If you would like to clean a smaller area, you may use Quick
Clean mode, which lasts 30 minutes, or Touch Up mode, which lasts 15 minutes.
Waffle Track and Spiral Track are best used when cleaning a small spill. When
Waffle Track is selected, Bob travels in a grid pattern; when Spiral Track is
selected, Bob travels in a gradually widening circle. Select Wall Track to make
Bob travel along the perimeter of your room.