bObsweep PetHair Plus WPP56001, Руководство пользователя, Страница: 86 / 93

86
6. My Bob won’t turn on no matter what I do.
If Bob does not start after flipping his power switch ON, his battery has likely
drained too low to operate. To recharge him, place him on his charging station
with the metal plates on his underside sitting on top of the nodes on his station.
Alternatively, you can unplug the adapter from the charging station and plug it
directly into the inlet above Bob’s power switch. When Bob charges, the battery
bars on his display screen flash and the word “charging” lights up. Let Bob
recharge fully before asking him to clean again. When Bob has fully charged, the
battery bars remain still and the word “charging” disappears.
7. Why is Bob beeping?
Bob beeps as he is entering standby mode and once every 2 minutes while
in standby mode. To conserve battery, turn his power switch OFF. You may
also mute Bob’s beeping by pressing the MUTE button on his cover or
FullCommand™ remote.
Bob also beeps when he encounters a problem and needs assistance. In addition
to beeping, he will identify the source of the issue on his screen.
8. Bob is having trouble finding his charging station. Where is the best place to put
his station?
After making sure the station is synced, place it in a central location with plenty
of space around it, so that he may detect it from afar. To help Bob dock, place
the charging station against a wall on a flat, level surface.