Quick Start
Charging
Charging Bob
Charging Bob Using the Charging Station
Place Bob on his charging station with the metal plates on his
underside sitting on top of the nodes on his station. Make sure
the station is plugged in and the station’s red power light is on.
When Bob is Charging:
The battery bars flash and the word “charging” is lit.
When Bob is Fully Charged:
The battery bars remain still and the word “charging”
is no longer lit.
Charging Bob Using the Adapter
Plug the charging adapter directly into the inlet on Bob’s side.
Sending Bob to his Charging Station
Press the CHARGE button on his FullCommand™ remote or
cover.
Charging Bob
check up
charging
Oops! I feel there’s something funny
going on with my:
Edge Sensors
Touch Sensors
Left Wheel
Main Brush
Obstacle Sensors
Dustbin
Right Wheel
Power System
cleaning
cleaning mode
deep
clean
quick
clean (30M)
touch
up (15M)
waffle
track
spiral
track
wall
track
28
27