The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
B-3574 Rev. 10/1/16
R/A, S/E
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
© 2016 by Bobrick Washroom Equipment, Inc.
INSTALLATION:
Provide framed rough wall opening 16'' wide x 29-1/4'' high (405 x 745mm). Mini mum recessed depth required from finish
face of wall is 4'' (102mm). Top of wall opening should be 42-3/8'' (1075mm) from finish face of floor to allow placement of
horizontal grab bar at 33'' (840mm) height across front of unit and installation of 18" vertical grab bar (ICC A117.1-2009). Allow
clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with
mechani cal engineer to avoid pipes, vents, and conduits in wall. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between
framing and cabinet at all points indicated by an
S,
then secure unit with #8 x 1-1/4" (4.2 x 30mm) sheet-metal screws
(not furnished).
Designer's Notes:
1. Recessed B-3574 mounts flush against side wall in accessible toilet compartment has toilet tissue dispenser on right side
of unit.
2. Position unit on wall with centerline of toilet tissue dispenser 7" - 9" (180 - 230mm) in front of leading edge of toilet.
3. For unit to mount on right side of toilet (when seated on toilet) see model B-35745.
4. For visual placement of models inside toilet compartment, refer to Technical Bulletin TB-92.
SPECIFICATION:
Recessed toilet seat-cover dispenser, sanitary napkin disposal, and toilet tissue dispenser shall be Type-304 stainless steel with
all-welded construction; exposed surfaces shall have satin finish. Toilet tissue dispensers shall be ABS plastic. Flange shall be
drawn and beveled, one-piece, seamless construction. Unit shall mount flush against side wall in accessible toilet compartment
to allow clearance for grab bar across front of unit and installation of 18" vertical grab bar (ICC A117.1-2009). Doors shall be
one-piece, seamless construction; secured to cabinet with a full-length stainless steel piano-hinge; and equipped with a tumbler
lock keyed like other Bobrick washroom accessories. Toilet seat-cover dispenser holds 500 paper covers. Self-closing disposal
panel shall be secured to door with a spring-loaded, full-length stainless steel piano-hinge, has hemmed edges and equipped
with an international graphic symbol identifying napkin disposal. Sanitary napkin disposal shall be furnished with a removable,
leak-proof, molded polyethylene receptacle with a capacity of 0.8-gal. (3.0-L). Unit shall be equipped with two theft-resistant,
heavy-duty, one-piece molded ABS toilet tissue spindles that hold standard-core rolls up to 5-1/4'' (135mm) diameter
(1800 sheets). Spindles shall be removable from cabinet only when door is open.
Recessed Seat-Cover Dispenser, Sanitary Napkin Disposal, And Toilet Tissue Dispenser shall be Model B-3574
of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jack son, Tennessee; Los Angeles, California;
Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd.,
Australia; and Bobrick Washroom Equipment Limited, United Kingdom.