bObi Pet NW604001, Руководство пользователя, Страница: 9 / 52

16 17
Before bObi’s first clean, you must install her battery. Make sure bObi’s power
switch is turned OFF.
After installing bObi’s battery, charge bObi for 8 hours before first use.
bObi will chirp, her lights will flash, and the center light will blink to indicate that
she is charging. The other lights will disappear.
Install bObi’s Battery Charge bObi
Remove the battery cover
using a Phillips head
screwdriver.
Plug the battery in at the
circuit junction. Tuck the
wire into the side of the
compartment and slide
the battery in.
Replace the cover and re-
tighten the screws.
1 2 3
Plug the charging adapter into the side
of the charging station. The station’s red
power light will turn on.
Place bObi on her charging station with
the metal nodes on her front resting
against the plates on her station.
1 2
The center light on bObi
will remain solid when
she is fully charged and
ready to clean.