bObi Pet NW604001, Руководство пользователя, Страница: 43 / 52

84 85
Step 3: Battery
While in mode 0001, press LEFT on the remote. The checkup mode
indicator should read 0002. The main 4-digit number in the center of the
screen indicates the voltage of bObi’s battery in millivolts (mv).
A fully charged battery should have a voltage between 1300 and 1600 mv.
If the voltage is below 1400 mv, charge bObi for at least 8 hours and repeat
this step. bObi should not be tested while she is charging.
If bObi is fully charged and the voltage is 0000 mv, bObi’s battery is
disconnected. Open the battery compartment and check the battery
connection.
Step 4: Wall Sensors
While in mode 0002, press RGHT on the remote. The checkup mode indicator
should read 0100. Ignore the main 4-digit number in the center of the screen.
Use a thick, flat, and white surface to imitate a wall in front of bObi. Drag the
imitation wall from the left side of bObi’s front around to the right side. Numbers
1 – 5 at the top of the remote will become underlined one-by-one as you do this.