Wall
Drilling Location Mark
Anchors
Screws
10
Wall Mount
Paste the drilling location mark on the wall, then drill the hole according to the mark and Insert the anchors, pass the screw
through the back of the bracket, and fix the top of the bracket on the wall.
1. Mark Position
Place the mounting template where you
want the camera.For wall mounting, drill
four holes through four circles.
2. Mount Camera
Affix the camera base using the screws. For wall mounting, insert four
anchors into the holes and use the screws to affix the camera base over
the anchors.
Note
：
After installation, please properly insert the rubber plug to Lan
Port and Enclose the reset button cover.