![background image](http://html1.mh-extra.com/html/bnc/rtsa-7500/rtsa-7500_programmers-manual_2781254015.webp)
SCPI Command
Description
:CONDition?
:ENABle[?]
:TEMPerature?
Returns the RTSA7500's internal ambient temperature
See SCPI Command Set section (page
42
onward) for further details on the commands.
Caution pertaining to multi-user
: The current firmware version of the RTSA7500
allows multiple applications to connect to the unit simultaneously but it does not support
independent sessions. Therefore, the actions of one user may over-write those of
another. This could potentially damage the unit for instance if the front-end's gain were
incorrectly set. If multiple applications are connecting to the unit, it is advised that only
one of those is controlling the unit at any time.
The Architecture
The RTSA7500 is an integrated wireless radio receiver and digitizer/analyzer. It has an
embedded capture controller that enables users to:
define and execute real-time and sophisticated triggers, traces and sweeps;
configure the radio RFE and DSP in association with those traces or sweeps;
and
time-stamping and data output for captures.
Traces and sweeps are controlled by the capture controller as illustrated in the lower
portion of
Figure 2
. A trace and a sweep are defined as a single (block or continuously
streamed) capture and a series of captures, respectively, each with their associated
hardware configurations.