Berkeley Nucleonics Corporation
2955 Kerner Blvd., San Rafael, CA 94901 ° Tel (415) 453 9955 ° Fax (415) 453 9956 ° www.berkeleynucleonics.com
7.1 Troubleshooting Procedures
The table below summarizes potential problems and their solutions. If these
recommendations do not resolve the problem, BNC customer service can be
contacted for further assistance.
SYMPTOM
SOLUTIONS
No output pulse
•
No input gate
•
Input gate voltage too low
•
Input gate pulse width too short. Increase
width
•
Input gate frequency too high. Reduce
frequency
•
No +24 VDC input voltage. Check input
supply and connections
•
Enable circuit not satisfied
•
Output not connected correctly. Check all
cables and connections
•
Pulser is damaged. Contact BNC customer
service
7.2 Factory Service
If the procedures above fail to resolve an operational problem, please contact the
factory for further assistance:
Berkeley Nucleonics Corporation.
2955 Kerner Blvd. #D
San Rafael, CA 94901 USA
(415) 453-9955
/rma-forms