BN Thermic Ltd,
34 Stephenson Way,
Crawley, RH10 1TN
Tel: +44 (0) 1293 547361
Email: [email protected]
Web: www.bnthermic.co.uk
Please Note:- Specified cable sizes are for typical installations, correction factors may need to be used when determining actual cable sizes.
8. Heater Model
– SCHG-30 / 45 or SMH-30 / 45
Model- SCHG-+ CS-730/45 or SMH-30/45
Model- SCHG-30/45 or SMH-30/45 + CS-7 + Thermostat
9. Heater Model
– SCHG-30E
Model- SCHG-30E + CS-7
PLEASE CHECK ALL CONNECTIONS BEFORE TURNING ON AS INCORRECT WIRING IS NOT COVERED BY THE GUARANTEE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Your BN Thermic product is guaranteed for one year from date of purchase. We will
repair or replace at our discretion any part found to be defective. We cannot assume any consequential
liability. This guarantee in no way prejudices your rights under common law and is offered as an
addition to consumer liability rights.
CS-7INS-v01.1
Use 2.5mm² 3 Core Mains Cable (SCHG-45 or
SMH-45) or 1.5mm² 3 Core Mains Cable (SCHG-
30 or SMH-30) (see note above).
Use 2.5mm² 5 Core Cable (SCHG-45 or SMH-45)
or 1.5mm² 5 Core Cable (SCHG-30 or SMH-30) to
connect the heater to the CS-7 Controller (see
note above).
Remove any links
that may be present in
heater terminal box between terminals 1,2,3,4 or 5.
Use 1.5mm² 3 Core Mains Cable (see
note above).
Use 1.5mm² 6 Core Cable to connect
the heater to the CS-7 Controller (see
note above).
Remove any links
that may
be present in heater control box
between terminals 1,2,3,4 or 5.
Use 2.5mm² 3 Core Mains Cable (SCHG-45 or SMH-45) or 1.5mm² 3 Core Mains Cable (SCHG-30 or SMH-30) (see note above).
Use 2.5mm² 6 Core Cable (SCHG-45 or SMH-45) or 1.5mm² 6 Core Cable (SCHG-30 or SMH-30) to connect the heater to the CS-7 Controller (see note above).
Use 2.5mm² 6 Core Cable (SCHG-45 or SMH-45) or 1.5mm² 6 Core Cable (SCHG-30 or SMH-30) to connect the CS-7 Controller to Thermostat (see note above).
Remove any links
that may be present in heater terminal box between terminals 1,2,3,4 or 5.
