BNCP-100-18V Rivet Gun_TM_8-15
Page | 3
BN Products-USA, LLC.
Store unused BNCP-100 Riveting Guns out of the
reach of children. Do not allow persons not familiar
with the device or persons who haven’t read these
instructions to operate the device. BNCP-100 Rivet-
ing Guns are dangerous when in the hands of inex-
perienced persons
Pay attention to the maintenance of BNCP-100 Riv-
eting Guns. Check if the moving parts are function-
ing flawlessly and do not jam. Check for broken and
damaged parts that could influence the operation
of the BNCP-100 Riveting Gun. Repair the damaged
parts before using the device. Accidents with BNCP-
100 Riveting Guns usually stem from maintenance
failures.
Use the BNCP-100 Riveting Gun, accessories, tools
etc. according to these instructions. Take into con-
sideration the working conditions and the type of
work. The use of BNCP-100 Riveting Guns for tasks
other than the intended ones can lead to dangerous
situations.
Use and handling
of the battery tools
Only recharge the batteries in charging devices ap-
proved by the manufacturer. There is a risk of fire
when using a charging device designed for a specif-
ic battery type when it is used with other batteries.
In BNCP-100 Riveting Guns, only use batteries that
have been designed for this tool. Using other bat-
tery types could lead to fire and injuries.
When not using the battery, keep it away from pa-
per clips, coins, keys, nails, screws and other small
metallic objects which may cause the contacts to
connect. If the battery contacts short-circuit, it may
lead to burns or fire.
Fluid may emerge from the battery if it is used in-
correctly. Avoid contact with that fluid. In case of
accidental contact with the body, rinse the area with
water. If the battery fluid comes in contact with the
eyes, additionally call for medical help. Uncontained
battery fluid can lead to burns and irritation of the
skin.
Service
Only let qualified personnel repair your BNCP-100
Riveting Gun and use only original spare parts. This
ensures the continuous safety of the BNCP-100 Riv-
eting Gun.
Safety informations for
BNCP-100 Riveting Guns
• Hold the BNCP-100 Riveting Gun firmly with
both hands when working with this tool. The
BNCP-100 Riveting Gun can be operated safer
when using both hands.
• Immediately turn off the BNCP-100 Riveting
Gun if the electric riveting tool jams.
• Be prepared for a high reacting torque which
causes strong recoil. The tool jams when the
BNCP-100 Riveting Gun is overloaded.
• Hold the BNCP-100 Riveting Gun tightly.
• Secure the work-piece that is to be riveted. A
work-piece is held more securely by a clamping
device or a bench vise than by hand.
• Make sure that the power switch is turned to the
“Off” position before inserting a battery. Holding
your fingers close to the power switch when car-
rying the BNCP-100 Riveting Gun or inserting a
battery while “On” may lead to accidents.
• Do not open the battery, as this leads to the
risk of a short-circuit. Keep the battery away
from heat (e.g. permanent sun radiation) and
from fire due to risk of explosion.
• If the battery is damaged or used in an inap-
propriate manner, vapors may emerge from it.
Get some fresh air and call for medical help in
case of complaints. The vapors can lead to ir-
ritation of the respiratory tracts.
• If the battery is defective, fluid may emerge
from it and coat adjacent objects. Check the
parts affected, clean them or replace them, if
necessary.
