BN Products BNCE-30-24V, Руководство по эксплуатации и инструкция

Страница: 4 / 16

Page | 4
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
•
Keep fingers and body parts away from the blade opening.
P o w e r To o l U s e a n d Ca re
• Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and m ust be repaired.
•
Disconnect the plug from the power source and/or the battery pack from the power
tool before m aking any adjustm ents, changing accessories, or storing power tools.
Such preventive safety m easures reduce the risk of starting the power tool acciden -
tally.
• Store idle power tools out of the reach of children and do not allow persons unfam iliar
with the power tool or these instructions to operate the power tool.
• Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for m isalignm ent or binding of m oving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If dam
-
aged, have the power tool repaired before use. Many accidents are caused by poorly
m aintained power tools.
• Keep cutting tools sharp and clean. Properly m aintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and blades in accordance with these instructions,
taking into account the working conditions and the work to be perform ed. Use of the
power tool for operations different from those intended could result in a hazardous
situation.
S e rvice
Have your power tool serviced only by a qualified repair person using only identical re
-
placem ent parts. This will ensure that the safety of the power tool is m aintained.
Cutting Edge Saw™ Package
Upon purchasing the Cutting Edge Saw, open the carrying case and check the contents for
the following:
• BNCE-30 -24V Cutting Edge Saw with blade
m ounted
• Rem ovable Side Handle and chip collector bag
• Allen Wrenches for Blade Rem oval and Installation
• Additional Saw Blade, Additional Battery
• Operation Manual
If anything is m issing or dam aged please do not return this packaged unit to the distribu-
tor, please call the Benner-Nawm an custom er service departm ent: 80 0 -992-3833 or 928-
684-2813