BMW X2 2021, Руководство пользователя

Страница: 265 / 304

4. Attach a new wiper blade. The wiper blade
must engage audibly.
5. Fold down the wiper arm.
Replacing the rear wiper blade
1. Lift the wiper up fully and pull off the wiper
blade, arrow.
2. Position the new wiper blade and press it on
until it you hear it snap into place.
3. Fold the wipers in.
Light and bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contribution
to vehicle safety.
The vehicle manufacturer recommends that you
have the relevant work carried out a dealer’s
service center or another qualified service center
or repair shop.
A spare light box is available from a dealer's serv‐
ice center or another qualified service center or
repair shop.
Follow the safety information, refer to page
265 .
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting di‐
odes installed behind a cover as a light source.
These light-emitting diodes are related to con‐
ventional lasers and are officially designated as
Class 1 light-emitting diodes.
Follow the safety information, refer to page 265 .
Safety information
Lights and bulbs
Warning
Bulbs can get hot during operation. Contact
with the bulbs can cause burns. There is a risk
of injury. Only change bulbs after they have
cooled off.
Warning
Work on switched-on lighting systems can
cause short circuits. There is a risk of injury or
risk of damage to property. When working on
the lighting system, switch off the lights in
question. If necessary, heed the bulb manufac‐
turer's instructions.
NOTICE
Dirty bulbs have a reduced service life. There is
a risk of damage to property, among other po‐
tential damage. Do not hold new bulbs with
your bare hands. Use a clean cloth or some‐
thing similar, or hold the bulb by its base.
Light-emitting diodes (LEDs)
Warning
Intensive brightness can irritate or damage the
retina of the eye. There is a risk of injury. Do not
look directly into the headlights or other light
sources. Do not remove the LED covers.
Headlight glass
Condensation can form on the inside of the
headlight glass in cool or humid weather. When
driving with the lights switched on, the conden‐
Seite 265
Replacing components
MOBILITY
265
Online Edition for Part no. 01405A2CF16 - II/21