BMW X2 2021, Руководство пользователя

Страница: 124 / 304

Orange lights
Active Cruise Control
The number bars shows the selected
distance from the vehicle driving ahead.
Camera-based cruise control with
Stop&Go function, ACC, refer to page 171 .
Vehicle detection, Active Cruise Control
Indicator light illuminates: a vehicle has
been detected ahead of you.
Indicator light flashes: the conditions are
not adequate for the system to work.
The system was deactivated but applies the
brakes until the driver actively resumes control of
the vehicle by pressing on the brake pedal or ac‐
celerator pedal.
Yellow lights
Antilock Braking System ABS
The Brake Assistant function may not
activate. Avoid abrupt braking. Take the
longer braking distance into account.
Have the system immediately checked
by a dealer's service center or another
qualified service center or repair shop.
DSC Dynamic Stability Control
The indicator light flashes: DSC controls
the drive and braking forces. The vehicle
is stabilized. Reduce speed and modify
your driving style to the driving circumstances.
The indicator light lights up: DSC has malfunc‐
tioned.
Have the system checked by a dealer's service
center or another qualified service center or re‐
pair shop.
DSC, refer to page
164 .
DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
DSC is deactivated or DTC is activated.
DSC, refer to page
164 , and DTC, refer
to page 166 .
Flat Tire Monitor FTM
The FTM signals a loss of tire inflation
pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Run-flat tires, refer to page
151 .
Tire Pressure Monitor TPM
The indicator light illuminates: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
The indicator light flashes and is then illuminated
continuously: flat tires or tire pressure losses
cannot be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
▷ TPM was unable to complete the reset. Re‐
set the system again.
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor TPM, refer to page 146 .
Steering system
Steering system may not be working.
Seite 124
CONTROLS
Displays
124
Online Edition for Part no. 01405A2CF16 - II/21