BMW R 1200RT, Руководство пользователя для мотоциклиста

Страница: 40 / 190

Possible cause:
The motorcycle has not reached
the minimum speed (
102).
TCP/RDC sensor is not
active
min 19 mph (min 30 km/h)
(The RDC sensor does not
send its signal to the motor-
cycle until after the minimum
speed has been exceeded.)
Watch the RDC display at
higher speed. A continuous
error is only present if the
general warning lamp also
lights up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
There is a fault in the radio con-
nection to the RDC sensors.
Possible causes are radio sys-
tems in the surrounding area,
which interfere with the connec-
tion between the TPC/RDC con-
trol unit and the sensors.
Observe the RDC display in a
different environment. A con-
tinuous error is only present if
the general warning lamp also
lights up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Sensor defective or
system error
with Tire Pressure Control
(TPC/RDC)
OE
shows yellow.
+ "
--
" or "
-- --
" is indi-
cated.
Possible cause:
Wheels without RDC sensors are
mounted.
Retrofit wheel set with RDC
sensors.
Possible cause:
1 or 2 RDC sensors have failed
or a system fault has occurred.
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
A system fault has occurred.
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
3
38
z Displays