BMW R 1200RT, Руководство пользователя для мотоциклиста

Страница: 80 / 190

Activation takes 30 seconds to
complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
To deactivate the motion sen-
sor (for example if you are
about to transport the motor-
cycle on a train and the sway-
ing movement of the moving
train could trip the alarm), press
button
1 on the remote con-
trol again during the activation
phase.
Turn indicators are illuminated
three times.
Confirmation tone sounds three
times (if programmed).
Motion sensor is deactivated.
Alarm
with anti-theft alarm system
(DWA)
OE
The alarm can be triggered by
the motion sensor
an attempt to use an unau-
thorized key to switch on the
ignition
disconnecting the DWA from
the motorcycle battery (DWA
battery takes over the power
supply – alarm sound only, haz-
ard warning lights do not flash)
If the DWA battery is discharged
all functions remain operational;
the only difference is that the
alarm cannot be set off if the
system is disconnected from the
motorcycle battery.
An alarm lasts for approximately
26 seconds. During the alarm,
an alarm tone sounds and the
turn indicators flash. The type
of alarm sound can be set by
an authorized BMW Motorrad
retailer.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm system indi-
cator lamp then signals the rea-
son for the alarm for one minute.
The meanings of the flash codes
are as follows:
1 flash: motion sensor 1
2 flashes: motion sensor 2
3 flashes: ignition switched on
with unauthorized key
4
78
z Operation