BMW R 1100 S EVO, Руководство по обслуживанию, Страница: 81 / 95

34.16
Bleeding rear wheel circuit
•
Open rear wheel circuit reservoir (1).
e
Important:
To prevent brake fluid from entering the connector,
do not release the ABS pressure modulator plug
connections.
•
Draw off the old brake fluid from the wheel circuit
reservoir.
•
Remove rear brake pads.
e
Important:
Only use the piston reset
device, BMW No. 34 1 531 , if the wheel circuit res-
ervoir cover is open.
•
Use the adapter, BMW No. 34 1 536 , instead of
the external brake pad.
•
With the handle outwards, use the reset
device, BMW No. 34 1 531 , on the rear brake
caliper to press back the pistons completely and
to position them.
•
Wrap a cloth around the brake caliper.
•
Connect the brake bleeding device to the bleed
screw, but do not switch it on.
•
Switch on the ignition.
L
Note:
After switching on the ignition, always wait for the
BMW Integral ABS to complete its self-diagnosis.
Do not operate the brake lever until self-diagnosis
has completed.
•
Gently press the footbrake until the pump just
starts up.
•
Open the bleed screw.
•
Drain wheel circuit using a pump.
•
Close the bleed screw.
•
Release the brake and switch off the ignition.
•
Disconnect the brake bleeding device from the
bleed screw.
R28340110
1
R28000170
34 1 536
34 1 531