![background image](http://html1.mh-extra.com/html/bmw/n62b44/n62b44_manual_2780640045.webp)
43
N62 Engine
Cooling Radiator
The radiator is made from aluminum and is divided into a high-temperature section and a
low-temperature section by a partition wall (see coolant circuit diagram). The coolant first
flows into the high-temperature section and then back to the engine, cooled.
Some of the coolant flows through an opening in the radiator partition wall to the low-tem-
perature section where it is cooled further. The coolant then flows from the low-tempera-
ture section (when the ÖWT thermostat is open) into the oil/coolant heat exchanger.
Coolant Expansion Tank
The expansion tank is mounted on the right hand wheel housing (engine compartment).
N
No
otte
e::
The expansion tank should never be filled above the Max marking. Excess coolant is
expelled by the pressure relief valve in the cap as it heats up. Avoid overfilling the expan-
sion tank because the cooling circuit design ensures very good “self bleeding”.
Cooling Components
1. Cooling Radiator
4. Engine oil/air heat exchanger connection
2. Expansion Tank
(hot countries only)
3. Water Pump
5. Transmission oil/coolant heat exchanger
Содержание N62B44
Страница 6: ...4 N62 Engine 42 02 02...