BMW M3 SEDAN, Руководство пользователя

Страница: 253 / 392

Only one turning radius line is displayed after the
steering wheel is turned past a certain angle.
Parking using pathway and turning radius
lines
1. Position the vehicle so that the red turning ra‐
dius line leads to within the limits of the park‐
ing space.
2. Turn the steering wheel to the point where
the green pathway line covers the corre‐
sponding turning radius line.
Obstacle marking
Depending on the vehicle equipment, obstacles
behind the vehicle are detected by the PDC Park
Distance Control sensors.
Obstacle markings can be faded into the image
of the rearview camera.
The colored thresholds of the obstacle markings
match the markings of the PDC Park Distance
Control.
Setting brightness and contrast
via iDrive
With the rearview camera switched on:
1. Move the Controller to the right, if needed.
2. "Camera image"
3. To perform the desired setting:
▷ "Brightness"
▷ "Contrast"
System limits
System limits of the sensors
Additional information:
▷ Cameras, refer to page 35 .
Deactivated camera
When the camera is deactivated, for instance
when the trunk lid is open, the camera image is
displayed hatched in gray.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Depending on the vehicle equipment, some as‐
sistance functions also consider data from the
PDC Park Distance Control.
Follow the notes in the PDC Park Distance Con‐
trol chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not estimate
the distance from the objects on the display.
With Parking Assistant:
Parking Assistant
Concept
The system supports the driver in the following
situations:
▷ When parking parallel to the road, parallel
parking.
Seite 253
Driver assistance systems
CONTROLS
253
Online Edition for Part no. 01405A1E4B0 - X/20