BMW HP2 Megamoto 2007, Руководство пользователя для мотоциклиста

Страница: 80 / 133

Installing rear-wheel
stand
Make sure ground is level and
firm and park the motorcycle.
Use rear-wheel stand with tool
number (363980) with adapter
shaft (363986) appropriate to
the motorcycle.
Set the desired height of the
rear wheel stand using the
bolts
1 .
Remove the lock washer 2 ; to
do so, press the unlock but-
ton
3 .
Push the rear-wheel stand from
the right onto the rear axle.
Mount lock washer
2 from left
by pressing release button.
Place your left hand on the
motorcycle and your right
hand on the lever
4 of the rear
wheel stand.
Raise motorcycle while simul-
taneously pressing lever down-
ward until motorcycle stands
vertically.
Press lever onto ground.
Lamps
General instructions
A warning appears in the multi-
function display if a bulb is de-
fective. If the brake or rear light
fails, the symbol is accompanied
by the 'General' warning light,
which lights up yellow. If the rear
light fails the second filament of
the brake light shines at reduced
7
78
z Maintenance